Cell Ranger6.0, printed on 12/05/2024
Cell Ranger's pipelines analyze sequencing data produced from Chromium single cell 5′ RNA-seq libraries. This involves the following steps:
Run cellranger mkfastq on the Illumina BCL output folder to generate FASTQ files.
Run cellranger vdj on FASTQ files produced by cellranger mkfastq.
For the following example, assume that the Illumina BCL output is in a folder named /sequencing/140101_D00123_0111_AHAWT7ADXX
.
First, follow the instructions on running cellranger mkfastq to generate FASTQ files. For example, if the flowcell serial number was HAWT7ADXX
, then cellranger mkfastq will output FASTQ files in HAWT7ADXX/outs/fastq_path
.
To generate single-cell V(D)J sequences and annotations for a single library, run cellranger vdj with the following arguments. For a complete list of command-line arguments, run cellranger vdj --help. More options are described below this section.
For help on which arguments to use to target a particular set of FASTQs, consult Specifying Input FASTQ Files for cellranger count and vdj. |
Argument | Description |
---|---|
--id | A unique run ID string: e.g. sample345 |
--fastqs | Path of the FASTQ folder generated by cellranger mkfastq e.g. /home/jdoe/runs/HAWT7ADXX/outs/fastq_path
Can take multiple comma-separated paths, which is helpful if the same library was sequenced on multiple flowcells. Doing this will treat all reads from the library, across flowcells, as one sample. |
--reference | Path to the Cell Ranger V(D)J compatible reference e.g. /opt/refdata-cellranger-vdj-GRCh38-alts-ensembl-5.0.0 . If --denovo is specified, this argument is optional. |
--sample | Sample name as specified in the sample sheet supplied to mkfastq .
Can take multiple comma-separated values, which is helpful if the sample was sequenced on multiple flowcells and the sample name used (and therefore fastq file prefix) is not identical between them. Doing this will treat all reads from the library, across flowcells, as one sample. |
Argument | Description |
---|---|
--denovo | Do not use the V(D)J reference during the assembly process. If specified, --reference is optional, however if --denovo is specified but --reference is not, then --inner_enrichment_primers must be specified. The --denovo option is most useful for full de novo assembly without a V(D)J reference. If you
have a V(D)J reference, using --denovo will typically yield similar
but slightly degraded results. |
--inner-enrichment-primers | Name of a file containing primer sequences, one per line, that were used to enrich cDNA for V(D)J sequences. If there are two sets of primers, that should be the innermost reverse PCR primers, that are complementary to a constant region. For example for human TCR, the file having two lines:
would be equivalent to the default primers (if this option were not specified). However normally this option is used only for species other than human or mouse for which primers are not provided by 10x Genomics. All the provided primers may be found here. |
Argument | Description |
---|---|
--localcores | Restricts cellranger to use the specified number of cores to execute pipeline stages. By default, cellranger will use all of the cores available on your system. |
--localmem | Restricts cellranger to use the specified amount of memory (in GB) to execute pipeline stages. By default, cellranger will use 90% of the memory available on your system. |
Argument | Description |
---|---|
--lanes | Lanes associated with this sample |
Argument | Description |
---|---|
--chain |
Force the analysis to be carried out for a particular chain type. The accepted values are:
|
After determining these input arguments, run cellranger:
$ cd /home/jdoe/runs $ cellranger vdj --id=sample345 \ --reference=/opt/refdata-cellranger-vdj-GRCh38-alts-ensembl-5.0.0 \ --fastqs=/home/jdoe/runs/HAWT7ADXX/outs/fastq_path \ --sample=mysample \ --localcores=8 \ --localmem=64
Following a set of preflight checks to validate input arguments, cellranger vdj pipeline stages will begin to run:
Martian Runtime - v4.0.4 Running preflight checks (please wait)... yyyy-mm-dd hh:mm:ss [runtime] (ready) ID.sample345.SC_VDJ_ASSEMBLER_CS.VDJ_PREFLIGHT yyyy-mm-dd hh:mm:ss [runtime] (run:local) ID.sample345.SC_VDJ_ASSEMBLER_CS.VDJ_PREFLIGHT.fork0.chnk0.main yyyy-mm-dd hh:mm:ss [runtime] (ready) ID.sample345.SC_VDJ_ASSEMBLER_CS.VDJ_PREFLIGHT_LOCAL ...
By default, cellranger will use all of the cores available on your
system to execute pipeline stages. You can specify a different number of cores
to use with the --localcores
option; for example, --localcores=16
will limit cellranger to using up to sixteen cores at once. Similarly,
--localmem
will restrict the amount of memory (in GB) used by
cellranger.
The pipeline will create a new folder named with the sample ID you specified (e.g. /home/jdoe/runs/sample345
) for its output. If this folder already exists, cellranger will assume it is an existing pipestance and attempt to resume running it.
A successful cellranger vdj run should conclude with a message similar to this:
Outputs: - Run summary HTML: /home/jdoe/runs/sample345/outs/web_summary.html - Run summary CSV: /home/jdoe/runs/sample345/outs/metrics_summary.csv - Clonotype info: /home/jdoe/runs/sample345/outs/clonotypes.csv - Filtered contig sequences FASTA: /home/jdoe/runs/sample345/outs/filtered_contig.fasta - Filtered contig sequences FASTQ: /home/jdoe/runs/sample345/outs/filtered_contig.fastq - Filtered contigs (CSV): /home/jdoe/runs/sample345/outs/filtered_contig_annotations.csv - All-contig FASTA: /home/jdoe/runs/sample345/outs/all_contig.fasta - All-contig FASTA index: /home/jdoe/runs/sample345/outs/all_contig.fasta.fai - All-contig FASTQ: /home/jdoe/runs/sample345/outs/all_contig.fastq - Read-contig alignments: /home/jdoe/runs/sample345/outs/all_contig.bam - Read-contig alignment index: /home/jdoe/runs/sample345/outs/all_contig.bam.bai - All contig annotations (JSON): /home/jdoe/runs/sample345/outs/all_contig_annotations.json - All contig annotations (BED): /home/jdoe/runs/sample345/outs/all_contig_annotations.bed - All contig annotations (CSV): /home/jdoe/runs/sample345/outs/all_contig_annotations.csv - Barcodes that are declared to be targetted cells: /home/jdoe/runs/sample345/outs/cell_barcodes.json - Clonotype consensus FASTA: /home/jdoe/runs/sample345/outs/consensus.fasta - Clonotype consensus FASTA index: /home/jdoe/runs/sample345/outs/consensus.fasta.fai - Contig-consensus alignments: /home/jdoe/runs/sample345/outs/consensus.bam - Contig-consensus alignment index: /home/jdoe/runs/sample345/outs/consensus.bam.bai - Clonotype consensus annotations (CSV): /home/jdoe/runs/sample345/outs/consensus_annotations.csv - Concatenated reference sequences: /home/jdoe/runs/sample345/outs/concat_ref.fasta - Concatenated reference index: /home/jdoe/runs/sample345/outs/concat_ref.fasta.fai - Contig-reference alignments: /home/jdoe/runs/sample345/outs/concat_ref.bam - Contig-reference alignment index: /home/jdoe/runs/sample345/outs/concat_ref.bam.bai - Loupe V(D)J Browser file: /home/jdoe/runs/sample345/outs/vloupe.vloupe - V(D)J reference: fasta: regions: /home/jdoe/runs/sample345/outs/vdj_reference/fasta/regions.fa donor_regions: /home/jdoe/runs/sample345/outs/vdj_reference/fasta/donor_regions.fa reference: /home/jdoe/runs/sample345/outs/vdj_reference/reference.json - AIRR Rearrangement TSV: /home/jdoe/runs/sample345/outs/airr_rearrangement.tsv - All contig info (ProtoBuf format): /home/jdoe/runs/sample345/outs/vdj_contig_info.pb Waiting 6 seconds for UI to do final refresh. Pipestance completed successfully!
The output of the pipeline will be contained in a folder named with the sample ID you specified (e.g. sample345
). The subfolder named outs
will contain the main pipeline output files.
Once cellranger vdj has successfully completed, you can browse the resulting summary HTML file in any supported web browser, open the .vloupe file in Loupe V(D)J Browser, or refer to the Understanding Output section to explore the data by hand.